Cleaning And Maintenance - Ninja Foodi Manual

Installing and removing the pressure lid
Place the pressure lid on top of the unit with the on the lid and the
lined up evenly. Turn the lid clockwise until it locks in place. To unlock the pressure lid,
turn it anticlockwise. Lift it up and away from you, as some steam will remain in the unit
and escape when the lid is opened.

Cleaning and Maintenance

Cleaning: Dishwasher & Hand-Washing
The unit should be cleaned thoroughly after every use.
Removing & Reinstalling the Silicone Ring
To remove the silicone ring, pull it outward, section by section, from the silicone ring rack. The ring can be installed with either side facing up. To
reinstall, press it down into the rack section by section. After use, remove any food debris from the silicone ring and anti-clog cap.
Keep the silicone ring clean to avoid odour.
Washing it in warm, soapy water or in the dishwasher can remove odour. However, it is normal for it to absorb the smell of certain acidic foods. It is
recommended to have more than one silicone ring on hand. You can purchase additional silicone rings on ninjakitchen.eu.
NEVER pull out the silicone ring with excessive force, as that may deform it and the rack and affect the pressure-sealing function. A silicone ring
with cracks, cuts, or other damage should be replaced immediately.
NEVER clean the cooker base or pressure lid in the dishwasher. Inspect the pressure lid to ensure there is no debris blocking the valves.
on the base
NOTE: The pressure lid will not unlock
until the unit is completely depressurised.
Using your
ACCESSORY
FUNCTION
REQUIRED
Reversible Rack
in lower position
ACCESSORY
FUNCTION
REQUIRED
Cook & Crisp™ Basket
Removable Diffuser
Silicone Ring
Silicone
Ring Rack
GRILL
Reversible Rack
in higher position
functions
LID TEMP/PRESSURE TIME
HH:MM
Lock Pressure Lid and Adjust pressure from Set time, in minutes, and
turn valve to SEAL LO to HI as needed press START/STOP
HH:MM
No temp
adjustment
available
Lock Pressure Lid and Set time, in minutes, and
turn valve to VENT press START/STOP
HH:MM
Set time, in minutes, and
press START/STOP. When
Lock Pressure Lid and Adjust temp from complete, unit will switch to
turn valve to VENT LO to HI as needed Keep Warm and count up.
No time adjustment
available. Press
START/STOP
No lid necessary.
If using Pressure Lid, Adjust temp from
turn valve to VENT LO to HI as needed
LID TEMP TIME
HH:MM
Crisping Lid down Adjust temp Set time, in minutes, and
as needed press START/STOP
HH:MM
Crisping Lid down Adjust temp Set time, in minutes, and
as needed press START/STOP
HH:MM
No temp
adjustment
available
Crisping Lid down Set time, in minutes, and
press START/STOP
BUILDING PRESSURE
PRESSURE/TEMP RELEASE
Turn valve to VENT
for quick release. When
complete, unit will
Wait for unit to switch to Keep Warm
build pressure and count up.
Wait for unit to come
up to temp. When
complete, unit will
switch to Keep Warm
and count up.
SNEAK A PEEK SHAKE/TOSS
Lift the lid while Shake basket or
cooking to check toss with silicone
on food. Unit will
tipped-tongs for
automatically pause. even browning.
Lift the lid while
cooking to check
on food. Unit will
automatically pause.
Lift the lid while
cooking to check
on food. Unit will
automatically pause.