Mitsubishi Electric AE-200A Installation Manual page 33

(7) Click the [Browse...] button and select the update file (AExx_
FW####_****.dat) stored in the USB memory device, and click [Start
Update].
Note: The software cannot be downgraded to an earlier version.
Note: "####" indicates the software version.
(8) A software update process starts.
Note: It takes about ten minutes to complete the update.
Note: Do not disconnect the LAN cable or turn off the power to the AE-200/AE-50
while the software is being updated.
A Security Alert window may appear. When it appears, click [Yes] to
proceed.
(9) The AE-200/AE-50 will reboot after the update is complete.
Check that the version that will appear on the screen is the same as
the version of the update file. Also check that the version displayed
on the Web browser (the Registration of Optional Functions screen,
via the Web Browser for Initial Settings) is also the same.
Note: "#.##" indicates the software version.
(10) When using the Integrated Centralized Control Web or Web
Browser for Initial Settings, clear the history data of the browser and
Java cache. Refer to the Instruction Book (Initial Settings) for the
procedures.
WT07935X04 33
AExx_FW####_****.dat
AE-200A
7.60(1.07) #.##(*.**)
xxxxxx
AE-200A
7.60(1.07) #.##(*.**)
xxxxxx
#.##(*.**)