Mitsubishi Electric AE-200A Installation Manual page 16

5-5-3. Wall-embedded installation with an electrical box (Method 2)
Roundhead screw (M4 × 10)
(supplied)
L-shaped driver
(supplied)
5-5-4. Installation on a metal control box (Method 3)
Metal control box
(not supplied)
(supplied)
WT07935X04
Plate A
(supplied)
Plate B
Wall
Bushing
* Adjust the cable length so that they will fit in
the electrical box.
Electrical box (PAC-YG84UTB-J)
(sold-separately)
Wall
Plate A
(supplied)
Countersunk screw (M4 × 40)
(supplied)
Roundhead screw (M4 × 10)
(supplied)
Countersunk screw (M4 × 40)
(supplied)
16
Conduit tube
Locknut
Wire access hole
Electrical box
Seal the gap with putty.
M-NET transmission cable or
AC power cable
L-shaped driver
(supplied)