Mitsubishi Electric AE-200A Installation Manual page 31

(7) Touch [
] to display the login window.
Check that the version on the login window is the same as the version
of the update file (AExx_FW####_****.dat).
* If the name of the update file contains ####, "Ver. #.##" should be displayed on the
login window as shown at right.
(8) When using the Integrated Centralized Control Web or Web Browser
for Initial Settings, clear the history data of the browser and delete
Java temporary files. Refer to the Instruction Book (Initial Settings) for
the procedures.
10-2-2. Using a Web browser
[1] Preparation
Follow the instructions below to change the IP address of the PC that is used for software update.
Note: When the system is connected to the existing LAN, ask the system administrator for permission before changing the
IP address settings and updating the software.
(1) Click [Control Panel] in the Start menu, and click [Network and
Sharing Center]>[Local Area Connection].
In the [Local Area Connection Status] window, click [Properties].
(2) Click [Internet Protocol Version 4 (TCP/IPv4)] to select it, and click
[Properties].
WT07935X04 31
Ver. #.##