Procedure
*3
Group settings
Other initial settings
Exiting the [Initial
Settings] screen
*1 When the [AE-200 Apportion] setting is set to [Use], the [AE-200 M-NET] setting is fixed to [Do not use].
*2 [Exp(1-4)] when the [AE-200 M-NET] setting on the [Unit info.] screen is set to [Do not use].
*3 When using an apportioned electricity billing function, refer to the Instruction Book that comes with the "Charge" license for details.
WT07935X04
System
configuration
1
2
①
①
Touch the [Groups] tab in the [Initial Settings] menu.
②
Make group settings for AE-200, and touch [Save Settings].
Make sure that [AE200] is selected as [Controller], make group settings for AE-200,
②
and touch [Save Settings].
Touch the [AE200] button to change it to [Exp(1–3)]
③
AE-50 controllers, and touch [Save Settings].
Make the following settings as necessary.
Interlock settings (interlocked operation between LOSSNAY and indoor units)
①
①
Block settings
Floor Layout settings
User Information settings
①
①
Touch the
Details
icon to return to the [Monitor/Operation] screen.
23
*2
, make group settings for