8.2 Overview of Speaker Post
(A) Solder Loop Connections
(B) Keep loop leads as short as possible and lightly twisted,
avoid running wires near AC lines.
WX-C550
float
the
acoustical sound insulation . Connect as
microphone. Insulate the space between
the speaker and microphone it isolate
feedback.
Solder speaker connections.
Mount WX-C1050 to outside
of the speaker post.
If there is no install spot for
the WX-C550.
Connect as speaker.
Smaller 22/2 GA.
To speaker and microphone.
Larger 22/2 GA.
Twisted pair to loop coil.
microphone
in
Conduit form performed loop.
Microphone
Speaker
Conduit to store for speaker loop cables.
AC Conduit.
Install the WX-C550
push up speaker
flush with grill. Insulate with
acoustical insulation
Connect as speaker.