Manager Mode (Only One Headset) - Panasonic Attune WX-C3010 Installation Instructions Manual

6.7 Manager Mode (Only one headset)

You can set one headset (Order Taker or All-in-One Headset) to the manager mode in a Lane. Refer to the operation
manual of Order Taker or All-in-One Headset about the setting method. The headset set to the MANAGER MODE has
following functionality.
• The manager can interrupt store personnel's TALK or PAGE at any time by monopolizing one channel by priority.
• The Manager can hear audio from POS alone (setting necessary)
Complete ID Registration, to do this setting.
The headset set to the Manager mode has following functionality.
• The manager can interrupt store personnel's TALK or PAGE at any time by monopolizing one channel by priority.
• The Manager hears audio from POS alone.
1. Hold down the power button for two seconds or more to turn off the headset.
2. While holding R and T1 simultaneously, press the power button to turn on the headset. The headset enters manager
setting mode where the indicators and buttons have different functions than in normal operation. You can hear
"Connecting center module A" and power indicator is an alternate blinking of red and green. Also the Lane indicator A is
blinking yellow.
When you want to register the manager in another center module in a double-drive-thru environment, while holding R and
T2 simultaneously, press the power button to turn on the headset. You can hear "Connecting center module B" and the
power indicator blinks red and green. Also the Lane indicator B blinks green.
3. If manager mode setting is successful, you can hear "Manager" and the power indicator blinks green.
Order Taker Unit
(WX-T3020)
Order Taker Unit
(WX-T3020)
All in One Headset
(WX-H3050)
All in One Headset
(WX-H3050)