Vehicle Detector Beep Day/Night - Panasonic Attune WX-C3010 Installation Instructions Manual

6.2.2 Vehicle Detector BEEP DAY/NIGHT

In the case of Double Drive-Thru configuration, it is possible to select the Vehicle Detector Beep tone to be heard when a
customer approaches the menu board. Day/Night setup can be made by button operation at the front panel of this unit.
When the Day mode is set, the Beep Day/Night indicator of the center module will light in yellow. When the Beep
Day/Night button is pressed, the Night mode is assumed and this indicator will disappear.
Note:
• If POS Remote is set for ON, you have to note that no button operation of the Beep Day/Night is possible at the center
module.
DAY mode: When you are taking charge of lane A, if the vehicle detector is on the lane A, you will hear the beep A. If the
vehicle detector is on of the lane B, you will not hear the beep B.
NIGHT mode: When you are taking charge of lane A, if the vehicle detector is on the lane A, you will hear the beep A. If
the vehicle detector is on of the lane B, you will hear the low level beep B. When both vehicle detectors are on, you will
alternately hear the beep A and the low level beep B.
*1: When you press the button T1, the beep will change to low level beep B only.
*2: When you press the button T1, the beep will change to low level beep A only.