Auto Mode Settings - Panasonic Aicure ANUJ5014 User Manual

■ Auto Mode Settings

When operating the ANUJ5014/5012 Aicure via external control signals,
select Auto Mode as shown below.
From the touch-panel Menu screen, select and invert one of the
buttons.
Types of Start Signal
Pulse Begin irradiation upon start of external signal.
STAT Start irradiation when external signal switches from off
to on (turning the signal off during irradiation causes a
stop during irradiation).
Select Individual/All
MULTI Cause a single enabled LED to irradiate.
ALL Cause all enabled LEDs to irradiate.
The Multi/ALL setting is shown on the Auto Mode screen. For example,
if MULTI is selected followed by AUTO, the screen appears as follows.
Operation Modes
17