Panasonic Aicure ANUJ5014 User Manual page 2

LED Product Safety Precautions
LED Product Classification
The light source of the LED head connected to this product is classified as 3B
under the JIS C6802 "LED Product Safety Standard."
Controlling or calibrating this product by other than the procedures stipulated here
could cause exposure to dangerous LED radiation.
・ Do not look directly at LED-UV light, or at LED-UV light reflected in a mirror or
other reflective surface. Doing so could cause eye damage.
・ Install the main unit so that humans are not exposed to LED-UV light.
Exposure could injure the skin or cause other injury.
・ Always turn the key switch off before cleaning the LED head.
Cleaning the head while the switch is on could cause eye damage or injury to
the skin.
・ Never disassemble this product. Disassembling this product could cause
exposure to LED-UV light, causing eye damage or injury to the skin.
・ If there is a risk of the LED-UV light being exposed to UV reflective light, place
the product inside a cover with proper reflectance and heat characteristics to
block that reflective light.
・ When operating the controller, set up the system so that the path of the LED-UV
light is not at eye level.
・ It is strongly recommended that a protective barrier be placed around the
product so that people cannot approach it while it is operating.
・ Always wear protective goggles when using this product.
・ Never operate this product in a manner not described in this manual. Doing so
risks exposure to LED-UV light.
JIS C6802 stipulates user guidelines pertaining to safety precautions to be taken by
users and management standards. In the case of this product, please implement
safety precautions for a class 3B LED product. See JIS C6802, "Radiation Safety
Standards for LED Products" for details.
ii
Max output: 150 mW
Class 3B LED Product
Safety Precautions for Users
Wavelength: 365 ±5 nm
JIS C6802: 2005