Table of Contents
Advertisement
1 Features of the ANUJ5014/5012 Aicure
The ANUJ5010 Aicure is an UV curing system that quickly hardens UV resins (inks, adhesives, and
coatings) via irradiation with UV light from an LED light source. Focused irradiation of UV resins
coated on minute surfaces (2 to 3 mm dia.) such as the lenses of CD, MD, and DVD players, and the
LCD panels of notebook PCs and the like, with UV radiation enables precise adhesion.
(ANUJ5014: 4 heads; ANU5012: 2 heads)
2
■ Irradiation power: 2000 mW/cm
high output (with high-output head installed)
This shortens the irradiation time and increases the UV intensity.
■ 10,000-hour light-source lifetime (70% of initial UV intensity)
This is roughly triple the lifetime of an equivalent lamp, which reduces running costs.
■ UV curing without temperature increases
A single 365-nm LED UV light source is used, which does not include infrared radiation. This
eliminates the risk of heat damage to the workpiece.
■ Stable UV intensity
UV intensity is kept constant, even if the ambient or LED temperature changes.
■ Easy-to-install LED head
At 12 mm dia. x 52 mm len., the LED is easy to mount on a jig. Locking the LED head in place reduces
overheating and increases UV intensity.
■ No cooling fan construction allows use in clean rooms
There is no need to deal with exhaust.
■ Programmable UV radiation from 4 or 2 independent heads
Each LED head can be independently controlled. Each head can be controlled together or in
combination as well. Setting irradiation patterns with programmed UV intensities and irradiation time
separately for each head in keeping with the qualities of the material to cure enables 10 different work
patterns to be stored.
1
Advertisement
Table of Contents
