GE LOGIQ E9 User Manual page 246

Safety
Warning Label Locations (continued)
1. Manufacturer's name and address
2. Prescription Device (For U.S.A. Only)
3. ETL Label: NRTL Listing and Certification Mark
is used to designate conformance to nationally
recognized product safety standards. The Mark
bears the name and/or logo of the testing
laboratory, product category, safety standard to
which conformity is assessed, and a control
number.
4. CISPR Emissions Label
5. Authorized European Representative address
6. Country-specific labels
7. This machine should be used in compliance
with law. Some jurisdictions restrict certain
uses, such as gender determination. (shown for
country specific label)
8. RoHS Label–China systems only (shown for
country specific label)
9. Non-Ionizing Electromagnetic Radiation
10. "ATTENTION" - Consult accompanying
documents" is intended to alert the user to refer
to the operator manual or other instructions
when complete information cannot be provided
on the label.
11. Possible shock hazard. Do not remove covers
or panels. No user serviceable parts are inside.
Refer servicing to qualified service personnel.
4-44
Table 4-8: Rear Panel Label Explanations
12. The equipment weighs approximately 135 kg
(298 lbs). To avoid possible injury and
equipment damage when transporting from one
area of use to another:
• Be sure the pathway is clear.
• Limit movement to a slow careful walk.
• Use two or more persons to move the
equipment on inclines or long distance.
13. WEEE symbol
14. BF Applied Part
15. The CE Mark of Conformity indicates this
equipment conforms with the Council Directive
93/42/EEC.
16. Mercury Warning Label
17. GOST Mark - 220V system only–Russia
(shown for country specific label)
18. Identification and Rating Plate–USA/Asia 120V
console
19. Identification and Rating Plate–Europe/Asia/
USA 220V console
20. Identification and Rating Plate–China
21. Identification and Rating Plate– Korea
LOGIQ E9
Direction 5454884-100 English Rev. 1
–
User Guide