Yamaha Rhino 700 Fi Owner's Manual page 63

Spring preload setting:
Minimum (soft):
Distance A = 63.5 mm (2.50 in)
Standard:
Distance A = 63.5 mm (2.50 in)
Maximum (hard):
Distance A = 78.5 mm (3.09 in)
3. Tighten the locknut to the specified
torque.
Tightening torque:
Locknut:
42 Nm (4.2 m·kgf, 30 ft·lbf)
NOTICE
Always tighten the locknut against the ad-
justing nut, and then tighten it to the spec-
ified torque.
Rebound damping force
Turn the rebound damping force adjusting
screw in direction a to increase the rebound
damping force and thereby harden the damp-
ing, and in direction b to decrease the re-
bound damping force and thereby soften the
damping.
1. Rebound damping force adjusting screw
2. Position indicator mark
4-32
b a
3. Match mark
1
2
3