General Maintenance And Lubrication Chart - Yamaha Rhino 700 Fi Owner's Manual

Hide thumbs Also See for Rhino 700 Fi:
Table of Contents

Advertisement

EVU01650

General maintenance and lubrication chart

ITEM
Cooling system*
Air filter element
Engine oil
Engine oil filter cartridge
Final gear oil
Differential gear oil
Front brake*
Rear brake*
Parking brake*
Accelerator pedal*
V-belt*
Wheels*
Wheel bearings*
Front and rear
suspension*
Steering system*
Rear upper and lower
knuckle pivots*
ROUTINE
• Check coolant leakage.
• Repair if necessary.
• Replace coolant every 24 months.
• Clean.
• Replace if necessary.
• Replace (warm engine before draining).
• Replace.
• Check oil level/oil leakage.
• Replace.
• Check operation/brake pad wear/fluid leakage/see page 8-6.
• Correct if necessary. Replace pads if worn to the limit.
• Check operation/brake pad wear/fluid leakage/see page 8-6.
• Correct if necessary. Replace pads if worn to the limit.
• Check operation and free play/brake pad wear.
• Correct if necessary. Replace pads if worn to the limit.
• Check operation and free play.
• Check operation.
• Check for wear, cracks, or damage.
• Check balance/damage/runout.
• Repair if necessary.
• Check bearing assemblies for looseness/damage.
• Replace if damaged.
• Check operation and for leakage.
• Correct if necessary.
• Check operation and for looseness/Replace if damaged.
• Check toe-in/Adjust if necessary.
• Lubricate with lithium-soap-based grease.
month
1
Whichever
comes first
km
320
(mi)
(200)
hours
20
8-5
INITIAL
EVERY
3
6
6
1200
2400
2400
(750)
(1500)
(1500)
75
150
150
Every 20–40 hours
(More often in wet or dusty areas.)
12
4800
(3000)
300

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents