Replacing A Headlight Bulb - Yamaha Rhino 700 Fi Owner's Manual

Hide thumbs Also See for Rhino 700 Fi:
Table of Contents

Advertisement

Specified fuses:
Main fuse:
Fuel injection system fuse:
Headlight fuse:
Ignition fuse:
Auxiliary DC jack fuse:
Signaling system fuse:
Four-wheel-drive motor
fuse:
Radiator fan fuse:
Backup fuse:
6. Turn the key to "ON" and turn on the
electrical circuit in question to check if the
device operates. If the fuse blows again
immediately, have a Yamaha dealer
check the electrical system.
7. Install the battery compartment cover by
installing the quick fastener screws.
8. Close the hood.
EVU01670

Replacing a headlight bulb

If a headlight bulb burns out, replace it as fol-
40.0 A
lows.
10.0 A
1. Open the hood. (See pages 8-7–8-8 for
15.0 A
10.0 A
2. Remove the cover at the rear of the
10.0 A
10.0 A
10.0 A
25.0 A
10.0 A
1. Cover at the rear of the headlight
8-55
hood opening and closing procedures.)
headlight by pulling it off.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents