Saving, Reading And Writing Configuration To Ied - ABB RELION REX640 Engineering Manual

1MRS759117 A
6.1.8
REX640
Engineering Manual
GUID-4D5D7613-C775-4EC3-9A95-76DCC1746AEA V1 EN
Figure 100: Language selection
New languages can be added by clicking the Add Language button, selecting any
available language and clicking the OK button. The options Language 1...10 can be
used to specify a custom language.
PCM600 shows all the languages supported by the IED. When adding a new language
and writing it to the IED, it must be ensured that the corresponding language binary is
loaded in the IED and that the corresponding language pack for the connectivity
package is installed in the PC.
A warning message is displayed by the tool if the language binary is
not loaded in the IED.

Saving, reading and writing configuration to IED

1. Save the LHMI configuration in one of the alternative ways.
• On the File menu, select Save.
• Click the Save button on the toolbar.
• Press CTRL+S.
2. To write the configuration to the IED, click the Write to IED button on the
toolbar.
Section 6
LHMI engineering
121