Section 6
LHMI engineering
6.1.2
6.1.2.1
96
of languages supported by the relay and set the translated text for the
language for available configuration.
6.
Save the configuration.
7.
Preview the configuration before writing it to the relay.
8.
Write the configuration to the relay.
ABB built-in pages
The ABB built-in pages contain information and functionality which are common to
most of the applications. Widget properties are usually fixed on these pages but some,
such as measurement page and phasors page contents, can be modified.
Measurements page
The Measurements page contains two configurable measurement lists. The buttons at
the bottom of the page are used to navigate to other measurement-related pages:
Phasors, Load Profile, Harmonics and Temperatures.
Only the Measurements and Phasors pages are user-configurable.
GUID-6EC41570-99FA-472F-8667-E2A4FCEB2568 V1 EN
Figure 72:
Measurements page
The Measurements page configuration data is also used by the
WHMI, that is, even if the LHMI is not used with the relay, if the
measurements need to be seen on the WHMI, the Measurements page
configuration must be created in Graphical Display Editor.
1MRS759117 A
REX640
Engineering Manual