Installing Software Upgrades - Snap-On ZEUS User Manual

ShopStream Update Tool (SST)
xx.x
Figure 14-8 Typical update installation window
2. Select an installation option to continue:
Install Now—starts the software update installation. Proceed to step 3.
–
Install Later—closes the message. The message will reappear at a later
–
time as a reminder.
NOTE
If Install Later is chosen, you can select the SST icon from the notification
area to restart the installation at anytime.
3. Close the ShopStream Diagnostic Suite application. The ShopStream
Diagnostic Suite should remain closed until the software installation has
completed.
4. Follow the on-screen instructions to complete the installation.
5. After the installation is complete, open the ShopStream Diagnostic Suite
application.
6. Select Scanner from the Home Screen. If a Scan Module firmware update has
been received, a "Scan Module firmware update" message will display.
Proceed to
Firmware Updates
If the Scanner opens normally and no update message is displayed, proceed
–
to step 7.
xx.x
on page 33.
7. Turn the diagnostic tool off, then turn it on (re-boot).
8. From the toolbar, select Menu > Help > Version Info to confirm the new
version number is installed.

14.6 Installing Software Upgrades

NOTE
It is recommended that you perform software upgrade installations Monday –
Friday, during business hours to ensure customer care representatives are
available for support. The installation will take approximately 30 minutes. If the
installation is interrupted, Contact Snap-on Diagnostics Customer Care for
assistance. See the Snap-on contact information at the front of this manual.
NOTE
Before installing a software upgrade, have your Scan Module and USB cable
available. The software upgrade may include firmware updates that need to be
installed to the Scan Module.
z
To install a software upgrade:
1. Select the software upgrade available message
from the Windows taskbar notification area.
ShopStream Update Tool
Critical update available. Click here to install.
Figure 14-9 Typical upgrade installation message
180
Installing Software Upgrades
(Figure 14-9), or the SST icon