Fan Replacement (R5I); Additional Fan; Replacement (R2I, R3I); Replacement (R4I, R5I) - ABB ACS800 Hardware Manual

90

Fan replacement (R5i)

To remove the fan, undo the fixing screws. Disconnect the cable. Install the fan in
reverse order.

Additional fan

Types -0004-2, 0005-2, -0011-2 to -0020-2, -0006-3, -0009-3, -0020-3 to -0030-3, -
0009-5, 0011-5, -0025-5 to -0040-5 have an additional fan.

Replacement (R2i, R3i)

Remove the front cover. To remove the fan, release the retaining clip (1). Disconnect
the cable (2, detachable terminal). Install the fan in reverse order.

Replacement (R4i, R5i)

Remove the front cover. The fan is located on the lower right-hand side of the unit
(R4) or on the right-hand side of the control panel (R5). Lift the fan out and
disconnect the cable. Install the fan in reverse order.
Maintenance
Bottom view
1
Top view
2