Inverter Module Hardware; Frames R2I To R5I; Module Layout (Frame Size R3I Pictured) - ABB ACS800 Hardware Manual

16

Inverter module hardware

The ACS800-104 range of inverter modules contains components for building the
inverter unit(s) of a common DC bus system drive.
The chapter
module components. See also the
modules and related equipment.
The section
The ACS800-104 inverter modules have coated circuit boards as standard. A
Prevention of Unexpected Start feature is optionally available, consisting of a built-in
AGPS board.

Frames R2i to R5i

The DC input and motor output cables are connected to screw terminal blocks at the
bottom of the module, covered by a metal housing.
Frame R2i to R5i modules do not require an external charging circuit.
External du/dt filters are available; see the chapter
information.

Module layout (Frame size R3i pictured)

Hardware description
ACS800-104 ordering information
Control interfaces
1
4
4
4
5
2 3
lists the order codes of the inverter
Dimensional drawings
below shows the available control and I/O options.
ACS800-104 ordering
Item Explanation
1 Control panel mounting platform and CDP
312R control panel (optional). Can be
turned aside.
2 DC (input) connections
3 Motor (output) connection
4 Slots for optional I/O modules
5 I/O terminal blocks on RMIO (obscured)
for dimensions of the