Wizard - Quick Start (Flow)
Step 1 – Identification
1)
Navigate to Configure/Setup > Wizard > Wizard - Quick Start (Flow).
2)
You can accept the default values without modification. (TAG, Long TAG, Descriptor,
Message, and Date fields can be left blank.) If desired, make changes then click on
Next.
Step 2 – Application
1.
Select the Siemens transducer connected to the device.
2.
The Application Type defaults to Flow.
3.
Select the Temperature Source, and if fixed, enter a Fixed Temperature value.
4.
Click on Next.
1.
For details see parameter
Instructions (7ML19985MV01).
A5E33701270
COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL
1
2. 1 .3.Sensor Mode
in SITRANS LUT400 (HART) Operating
Page 63