Changing Parameter Settings Using Simatic Pdm - Siemens SITRANS LUT400 Manual

2. Click Apply to save your changes and return to the main menu, or click Apply and
Transfer to save your changes and transfer settings to the device.
Pump configuration via PDM Pump Control Wizard is now complete.

Changing parameter settings using SIMATIC PDM

Notes:
• For a complete list of parameters, see
a
instructions
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
a.
SITRANS LUT400 (HART) Operating Instructions (7ML19985MV01)
Many parameters are accessed via the 5-level menu in PDM. See
pull-down menus
1) Launch SIMATIC PDM, connect to SITRANS LUT400, and upload data from the
device.
2) Adjust parameter values in the parameter value field and then press Enter. The
status fields read Changed.
Page 24 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL
.
below for the others.
Parameter reference (LUI)
Parameters accessed via
in LUT400 operating
A5E33701270