Avid Technology Venue S6L System Manual page 39

Channel View (CTM)
Touching the Meters in Meters views automatically selects that channel and replaces Meters view with Channel view. Channel
view provides a complete view of the selected channel's parameters. Parameters in each touch zone are lit when that parameter is
on, and dimmed when off. As in Meters view, touching a touch zone assigns its associated parameters to the associated CKM in
Channel Control mode. Channel view also provides eight channel tiles, which you can touch to select, providing an uninterrupted
on-screen workflow.
7
2
1
5
3
4
6
CTM Channel view (input channel shown)
1 – Input
This zone shows level and gain reduction meters, as well as a selection of other input parameters. Touching this zone assigns the
same parameters to the CKM as the CHANNEL Channel Control Function switch.
2 – EQ
This zone shows the current EQ curve applied to the channel by the built-in channel EQ, and its on/off state. For output channels
with a graphic EQ inserted, the current GEQ curve is also shown. Touching this zone mirrors the function of the EQ Channel Con-
trol Function switch.
3 – Dynamics
This zone shows a composite dynamics graph for the channel, and the dynamics processor(s) on/off state(s). Touching this zone
mirrors the function of the DYNAMICS Channel Control Function switch.
4 – Inserts
This zone shows the channel's Inserts slots, and any plug-ins inserted in those slots, as well as the status of the channel's hardware
insert. Touching this zone mirrors the function of the PLUG-INS Channel Control Function switch.
5 – Aux Sends/Members/Matrix Mixer
This zone provides an expanded version of the Aux Sends/Members/Matrix Mixer touch zone available in the Meters view. Three
touch zones are provided, mirroring the function of the three MIX Channel Control Function switches.
S6L Control Surface Overview 27