Avid Technology Venue S6L System Manual page 144

Using Mains in a User Layout
When you assign Mains L-R + C/Mono to a User Layout, a single fader for each of the three Mains outputs is assigned to the Layout
regardless of the Mains' linked/unlinked state. When Mains are linked, adjusting the fader in the User Layout controls levels for
the linked Mains buses. You can target each individual Mains outputs on the control surface using the Attention switch, or on the
external screen using the Mains Focus button.
To target an individual Mains output in a User Layout on the control surface:
Assign the Mains to a User Layout (see
1
Press the Layouts Fader Bank Mode switch. Mains L-R + C/Mono are assigned to a single fader.
2
To attention one of the Mains, press the channel strip Attention switch until the channel display shows the desired Mains output.
3
L Mains
0.0 dB
A channel display showing Mains L targeted to the fader
To target an individual Mains output in the User Layout on the external screen:
Select the Inputs or Outputs page, fader strip, select the Mains Focus button above the Mute button to cycle through each Mains
1
channel.
To attention an individual Mains output on the external screen:
Assign the Mains to a User Layout and bank the User Layout
1
On the User Layout Mains fader strip, select the Mains Focus button to cycle through each Mains channel. The currently targeted
2
Mains bus is indicated in the button (L, R, C/M).
Mains Focus button
Working with Mains and VCAs
Assigning Channels to a User Layout
).
132