Asr Information Set Error Code - Hitachi HIDIC EH-150 Applications Manual

5.4.5

ASR information set error code

The error codes of ASR information setting is shown in table 5.4.5.1
Error
code
2101 General information (No.n): Port No. is incorrect.
2102 General information (No.n): Other station IP address
is incorrect.
2103 General information (No.n): Other station Port No. is
incorrect.
2104 General information (No.n): Cyclic time is incorrect. Illegal value or character is set for cyclic transmission time
2105 General information: Timeout is incorrect.
2106 General information (No.n): Port No. is in conflict
with ASR connection m.
2107 General information (No.n): Port No. is in conflict
with Task code connection p.
2108 General information (No.n): Port No. is in conflict
with the Diagnostic port.
2109 General information (No.n): Other station must be
specified.
2202 Receive Information (No.n): Top is incorrect.
2203 Receive Information (No.n): Size is incorrect.
2204 Receive Information (No.n): Top + Size exceeds the
limit.
2302 Send Information (No.n): Top is incorrect.
2303 Send Information (No.n): Size is incorrect.
2304 Send Information (No.n): Top + Size exceeds the
limit.
2305 Send Information (No.n): Total size is too big.
2306 Send Information: Item No. conflict.
2401 Invalid filename.
2501 User name required.
2502 Password confirmation failed.
*1: n should be in 1 to 6.
*2: p should be in 1 to 4.
Chapter 5 Configuration and procedure for starting communication
Table 5.4.5.1 ASR information setting error code
Comment
5-30
Cause
Illegal value or character is set for ASR connection n
number
*1
At ASR connection n
- Illegal value or character is set for ASR other station IP
address.
- The out of value of "0.0.0.0" to "255.255.255.255" is set
for ASR other station IP address.
Illegal value or character is set for ASR other station port
number at ASR connection n
*1
at ASR connection n .
Illegal value or character is set for ASR connection timeout.
The port number of ASR connection n
*1
of ASR connection m is in coincidence(conflict).
The port number of ASR connection n
*1
of ASR connection p is in coincidence(conflict).
The port number of ASR connection n
of diagnostic is in coincidence(conflict).
*1
ASR connection n is active station, but other station is
"Optional" is selected.
*1
At ASR connection n , illegal value or character is set for
head I/O address of receive area.
*1
At ASR connection n , illegal value or character is set for
head I/O address of receive area.
*1
At ASR connection n , data size of receive area is over the
supported I/O area of CPU module.
*1
At ASR connection n , illegal value or character is set for
head I/O address of send area.
*1
At ASR connection n , illegal value or character is set for
head I/O address of send area.
*1
At ASR connection n , data size of send area is over the
supported I/O area of CPU module.
*1
At ASR connection n , total send data size is over 727
words.
Item number of Send areas are duplicated.
Upload file name is not setup.dat.
User name is brank.
Characters of password input text box and password confirm
text box is not same.
*1
port
*1
.
*1
and the port number
*1
and the port number
*1
and the port number