Hitachi HIDIC EH-150 Applications Manual page 42
Programable controller; ethernet module(eh-eth)
Hide thumbs
Also See for HIDIC EH-150:
- Applications manual (117 pages) ,
- Instruction manual (29 pages) ,
- Applications manual (97 pages)
Table of Contents
Advertisement
No.
Name
Own Station
1)
Usage
To specify the usage of connection. It is possible to set Send(for sending) or
Receive(for receiving). It is possible to specify both. If the Send is not
specified (8) to (10) are not valid.
2)
Protocol
To specify the protocol of self station.
3)
Open Type
To specify the open type of self station. When Active is specified, open
request is sent activity. When Passive is specified, open request from the
target station is waited.
4)
Port No.
To specify the logical port number of self station.
Other Station
5)
Other station IP
To set the decision of specifying the target IP address or not. When Specified
address
is specified, the communication is done only with specified target. When
Optional is specified, the target station is not specified. If the Optional is
specified (6) and (7) is not valid.
6)
IP address
To set IP address of target station.
7)
Port No.
To set logical port number of target station.
8)
Type
To specify the sending type of connection. When Event Send is specified, (9)
and (10) are not valid. (Please specify 0 or nothing for these. It will error
when except 0 specified.)
9)
Cyclic Time
To specify the time interval of Cyclic Send.
10) Unit
This is the unit for Cyclic Time.
There are some limitations in the combination between parameter 1) 2) 3) 5) in table 5.4.2.1. These are
described in table 5.4.2.2.
2) Protocol
1
2
TCP/IP
3
4
5
UDP/IP
6
(*1): When "UDP/IP" is chosen as the protocol, ETH disregards the value which is set in "Open Type."
Chapter 5 Configuration and procedure for starting communication
Table 5.4.2.1 The list of items of ASR connection configuration
Table 5.4.2.2 The possible combination to set
Own Station
1) Usage
3) Open Type
Active
Send,
Receive,
Passive
Send/Receive
Send
Receive
Description
Other Station
5) Other station
IP address
Specified
Specified
Optional
*1
-
Specified
Specified
*1
-
Optional
5-23
Range for setting
Send, Receive
TCP/IP, UDP/IP
Active, Passive
1 to 65535
Optional, Specified
0.0.0.0 to
255.255.255.255
1 to 65535
Event Send, Cyclic
Send
0 to 1073741 (sec)
0 to 17895 (min)
0 to 298 (hour)
0 to 12 (day)
s, min, h, d
IP address setting
Port No.setting
Need
Need
No need
Need
Need
No need
Advertisement
Table of Contents
