Hitachi HIDIC EH-150 Applications Manual page 44

Chapter 5 Configuration and procedure for starting communication
(2) Displaying of "ASR I/O area configuration window"
Secondly, click the "Setting link selection" of "ASR I/O area display window" then the operation frame
changes to the "ASR I/O area configuration window". This window is shown in figure 5.4.3.2. And the items
which can be set by this configuration window are also shown in table 5.4.3.1.
When you click the "Set" button on the frame, EH-ETH will check the parameters. If all parameters are
correct, they will be saved into set up file, and the "ASR I/O area display window" will appear. If they are
wrong, set up file is not updated. In this case, please check and correct the value, and set again.
1). 2). 3).
4).
5). 6). 7).
Figure 5.4.3.2 ASR I/O area configuration window
5-25