Hitachi HIDIC EH-150 Applications Manual page 26

The setup page has three frames as figure 5.2.5.2 shows. The setup page's language is English only.
1. Menu Frame
1. Menu frame
This frame is the menu to change the contents of the operation frame.
2. Operation frame
This frame is shown to configure the several parameters. This frame is consisted 2 kinds of frame.
Name
Display Frame
Configuration Frame
3. Error frame
If the illegal parameters on the operation frame are detected the error code will be displayed onto this error
frame. Please refer the detailed description in chapter 5.2.8.
Chapter 5 Configuration and procedure for starting communication
Figure 5.2.5.2 Set up page
Table 5.2.5.2 Operation frame
This frame is used for displaying the current parameters related with the
selected link in the menu frame.
Display frame keeps the link(Setting) to the related configuration frame. To
change the current parameters please click this Setting link.
This is the frame to change the several parameters.
5-7
2. Operation
3. Error
Description
Frame
Frame