Ataching The Labels Etc; Attaching The Various Labels - Canon Finisher-R1 Service Manual

Chapter 3
F-3-38
<Saddle Finisher-R2>
1) Mount the rear upper cover (small) to the finisher
using a screw.
2) Mount the front foot cover [1] using a screw (RS
tightening; M3x8) [2].
3) Mount the rear foot cover [3] using a screw
(tapping; M4x12) [4].
[3]
[2]
[1]
F-3-39
3-16
[1]
[2]
[4]
4) Connect the finisher and its host machine with the
interface cable [1].
5) Fit the cable clamp [2] to the host machine, and
route the interface cable [1] through it.
When installing the interface cable, be sure to turn
off the host machine and disconnect its power plug
from the power outlet. Otherwise, you can suffer an
electric shock.
F-3-40

3.2.4 Ataching the Labels etc.

3.2.4.1 Attaching the Various
Labels
1) Attach the tray label [1] to the tray as indicated.
2) Attach the settings label [2] within the frame of the
tray label to suit the user habit of the user.
3) In the case of the Saddle Finisher-R2, attach the
Bookmaking label [3] to the saddle tray as shown.
[1]
[2]
0003-1771