E537; E540 - Canon Finisher-R1 Service Manual

Chapter 6

6.3.9 E537

Code
E537

6.3.10 E540

Code
E540
6-8
T-6-14
Detail Error
Description
0001 Aligning plate
rear motor
(M34)/
Aligning plate
rear home
0002
position
sensor(PI37)
T-6-15
Detail Error
Description
0001 Tray 1 shift
motor(M37)/
Tray 1 shift
area sensor
0002
PCB
Detection timing
The aligning plate does not return to
aligning plate rear home position sensor
when the alignment plate rear motor has
been driven for 4 seconds.
The aligning plate does not leave the
aligning plate rear home position sensor
when the alignment plate rear motor has
been driven for 4 seconds.
Detection timing
If the tray does not return to home position
when the tray 1 shift motor is driven for 20
seconds.
If the tray does not move to other area
when tray 1 shift motor is driven for 4
seconds.
0003-4673
0003-4678