Installation Procedure; Preparing The Finisher For Installation - Canon Finisher-R1 Service Manual

Chapter 3
1) Remove the 7 screws [1], and detach the lower right
cover [2].
[1]
F-3-15
2) Remove the fixing screw [1], and detach the
releasing plate (front) [2].
F-3-16
3) Remove the fixing screw [1], and detach the
releasing plate (rear) [2].
3-8
[2]
[1]
[1]
[2]
[2]
F-3-17
4) Mount the lower right cover you have removed
using the 7 screws.

3.2.2 Installation Procedure

3.2.2.1 Preparing the Finisher
for Installation
<Finisher-R1>
1) Mount the rail [1] to the finisher using 2 screws [2]
(binding; M4x6).
[1]
F-3-18
<Saddle Finisher-R2>
[1]
0003-1760
[2]