How To Enter A Value - Panasonic GP-X Series User Manual

2.2.2 How to Enter a Value

The value entry method for the upper limit is described as an example.
Setting Example
Change upper limit setting 2.0000mm to 4.5000mm.
1. In the detection state, press the
The MODE indicator (orange) next to the
key lights up to indicate the setting mode, and the
current memory number is displayed.
2. Press the
" " (H-thr) is displayed.
This is the upper limit setting change menu.
3. Press the
The most significant digit of the upper limit value
" " (2.0000) blinks.
4. Using the
number.
The number increases each time the
pressed.
The number decreases each time the
pressed.
5. Press the
and repeat step 4 to change the number.
6. After changing, press the
value.
7. Press the
The MODE indicator (orange) is not lit to indicate
that the controller has returned to the detection
mode.
*There is another method to replace the upper or lower limit setting with the current de-
tection distance.
*When the least significant digit blinks, press
negative conversion.
key.
key.
or key, change the blinking
key to move the blinking digit
key to set the
key.
key.
key is
key is
. All digits blink to indicate positive/
31