3.5 Trigger Input Setting
There are the following trigger input types for determining the sampling period.
Select the desired trigger mode.
■ External Trigger: "
Supply a signal from an external device using the timing input and reset input
terminal, to determine the sampling period.
■ Internal Trigger: "
Enter the trigger level in respect to the detected value.
The sampling period is determined through the relationship between the de-
tected value and trigger level.
■ Cyclic Trigger: "
Enter the sampling period directly.
Reference
Refer to section "2.3.2 Trigger Input" on page 38 for details of the trigger.
Trigger input setting
<Detection state>
<Application mode>
<Manual mode>
<Input trigger mode>
" (Ext)
" (Int)
" (FLICK)
Press
to select "APPLI".
To section "3.5.1
External Trigger Setting"
To section "3.5.2
Internal Trigger Setting"
To section "3.5.3
Cyclic Trigger Setting"
63