Samsung SC-M102 Owner's Instruction Book page 60

ENGLISH
Miscellaneous Information: Connecting the CAM with other Devices
Connecting the CAM to a PC using the USB cable
You can connect the CAM to a PC that supports USB connections.
Use the provided USB cable for connection to a PC.
1. Insert the cradle into the CAM.
2. Connect the provided USB cable to USB port of
the cradle.
3. Move [Mode Selector] down to turn on the CAM
and move it down again.
The Mode Selection screen appears.
4. Connect the other side of the USB cable to the
USB port of your PC.
If your Operating System is Windows XP,
a Removable Disk pop-up dialog will appear.
Disconnecting USB Connection
After completing the data transfer, you must disconnect the cable in the following way.
1. Select the removable disk icon and click the right mouse button to select 'Safely Remove Hardware'.
2. Select 'Stop' and disconnect the USB cable when the pop-up screen disappears.
Notes
If you disconnect the USB cable from the PC or the CAM during the data transfer,
the data transfer will stop and the data may be damaged.
If you connect the USB cable to a PC using a USB HUB or with other device at the same time,
it might cause conflict and may not work properly. If this occurs, remove all other devices and try the connection again.
114 114
Miscellaneous Information: Printing Photos
Printing with Pictbridge Function
With the Pictbridge Support, you can control the printer directly through
the CAM in order to print out stored pictures.
For direct printing of your stored pictures using the PictBridge function,
you must connect the CAM to a PictBridge printer using a USB cable.
1. Connect the CAM to the PC with the USB cable.
2. Move [Mode Selector] down to turn on the CAM.
USB menu screen appears automatically.
3. Move the [ / ] switch to select <PictBridge> and press the [OK] button.
4. Move the [ / ] switch to select <Copies> and press the [OK] button.
5. Move the [ / ] switch to select desired number and press the [OK] button.
You can select the number of copy from 0 to 99.
6. Move the [ / ] switch to select <Print> and press the [OK] button.
Notes
If you select <Back> in the menu, the previous menu appears.
If you want to select the next or previous photo, select <Next> or <Previous> using [
For further details about printing photos, refer to the User's manual of the printer.
ENGLISH
USB Mode
MassStorage
PC-Cam
PictBridge
Back
PictBridge 100-0056
Date On
Copies 5
Print
Next
Previous
PictBridge 100-0056
Date On
Copies 1
Print
Next
/ ] switch.
Previous
115 115