Samsung SC-M102 Owner's Instruction Book page 54

ENGLISH
Setting the CAM : Using USB Mode
Storing Files to the External Memory
1. Connect the CAM to the PC with the USB cable.
2. Move [Mode Selector] down to turn on the CAM.
USB menu screen appears automatically.
3. Move the [ / ] switch to select <MassStorage> and press the [OK] button.
Your PC recognize the USB device automatically. You may install the USB Driver manually
on Windows 98SE operating system.
4. Disconnect the USB cable if you finish storing.
Notes
If you disconnect the USB cable from the PC or the CAM during the data transfer, the data transfer will stop and
the data may be damaged.
If you connect the USB cable to a PC using a USB HUB or with other device at the same time, it might cause conflict
and may not work properly. If this occurs, remove all other devices and try the connection again.
Install the Windows 98SE Driver on Windows 98SE operating system using supplied CD. Refer to page 113 for further details.
102 102
Setting the CAM : Using USB Mode
Using PC Cam
You can use this the CAM as a PC camera for video chatting, video conference and other PC camera applications.
1. Connect the CAM to the PC with the USB cable.
2. Move [Mode Selector] down to turn on the CAM.
USB mode screen appears automatically.
3. Move the [
USB Mode
MassStorage
PC-Cam
PictBridge
Back
Notes
This function requires the specified USB Streaming Driver and Software to be installed. Refer to page 112 for further details.
The CAM can be used as a PC Camera for programs such as Windows Messenger. The use of the PC Cam varies depending on the
Software. Refer ro the documentation of the repective software products.
/ ] switch to select <PC-Cam> and press the [OK] button.
ENGLISH
USB Mode
2
MassStorage
PC-Cam
PictBridge
Back
USB Mode
3
MassStorage
PC-Cam
PictBridge
Back
103 103