GT Designer 2
4
GT Designer 2
(Version 2.73 or later)
To make sure the GT1020/GT1030 GOT is
able to use the latest functions and features,
it is the responsibility of the user to check and
update the firmware (Standard monitor OS)
of the GOT.
Launch the latest copy of GT Designer2 and
start a new project for the corresponding
GOT model (GT1020 or GT1030) with the
"FREQROL500/700" Inverter Type. Select
Yes to set the Communication Setting and
make sure the Standard I/F-1 CH No. is set to
1 before selecting OK . The "Screen Property"
window that pops up for making a new screen
can be either canceled or accepted for the fol-
lowing steps.
Go to the "Communication" menu and select
"To/From GOT" to bring up the "Communica-
te with GOT" window. Go to the "Communi-
cation configuration" tab and select "RS232"
and the corresponding "Port No." that con-
nects the PC to the GOT. With the GOT po-
wer ON, use the Test button to verify that the
PC and GOT can communicate properly then
turn the GOT power OFF.
GOT1000
Start-up Guide
5