Leister VARIMAT V2 User Manual page 15

Accessories
• Only Leister accessories should be used.
• Wire brush article no. 138.817
• Welding plate article no. 132.429
Training
• Leister Process Technologies and its authorised Service Centres offer free welding courses and training.
Maintenance
• The air inlet on the hot-air blower (8) must be cleaned with a brush if soiled.
• Clean welding nozzle (9) with wire brush.
• Check power supply cord (1) and plug for electrical and mechanical damage.
Service and Repair
• If the drive counter reaches 400 h or the blower counter reaches 2000 h, the message «Maintenance servi-
cing» will appear on the display the next time the main switch (3) is switched on. This message is displayed
for 10 seconds and cannot be skipped by the controls (4).
• Repairs should only be carried out by authorised Leister Service Centres. They guarantee a
correct and reliable repair service within 24 hours, using original spare parts in accor-
dance with the circuit diagrams and spare parts lists.
Warranty
• For this tool, we generally provide a warranty of one (1) year from the date of purchase (verified by invoice or
delivery document). Damage that has occurred will be corrected by replacement or repair. Heating elements are
excluded from this warranty.
• Additional claims shall be excluded, subject to statutory regulations.
• Damage caused by normal wear, overloading or improper handling is excluded from the guarantee.
• Guarantee claims will be rejected for tools that have been altered or changed by the purchaser.
15