Toro 1800 Power Curve Set-Up/Assembly page 8

1800 POWER CURVE
9. Install and tighten the locknut (Fig. 027).
10. Tighten the locknut on the opposite side of the
deflector chute assembly (Fig. 028).
11. Cycle the deflector chute to ensure it moves with a
small amount of resistance. Too tight, the deflector
chute will not move; too loose, the force of the snow
being discharged will flip the deflector chute up.
8
Fig. 027 PICT-1490
Fig. 028 PICT-1492
Service Instruction TSN0001a