Toro 1800 Power Curve Set-Up/Assembly page 7

5. Loosely install a lock nut to secure one side of the
deflector chute assembly (Fig. 023).
6. Position a rubber washer between the deflector
chute and the lower chute while maintaining the hole
alignment (Fig. 024).
Service Instruction TSN0001a
Fig. 023 PICT-1479
Fig. 024 PICT-1485a
1800 POWER CURVE
7. Insert the carriage bolt through the lower chute,
rubber washer and deflector chute (Fig. 025).
8. Install the metal flat washer onto the carriage bolt
(Fig. 026).
Fig. 025 PICT-1484
Fig. 026 PICT-1488
7