CHANGING A BULB
Dipped/main headlamps H7 55 W
– Pull the tab A upwards and remove the protective cover.
– Disconnect the connector.
– Press the end of the securing clip to remove it. Change
the faulty bulb.
– On fitting, ensure that the direction notches are in the
correct position and that the clip is secured correctly.
– Reconnect the connector.
– Replace the protective cover.
Remarks
– Only touch the bulbs with a dry cloth.
– To replace the bulbs on the right side, remove the wash-wipe reservoir filler pipe first.
– Condensation may form inside the headlamps. It will disappear when the lights are used.
26-05-2003
PRACTICAL INFORMATION
Side lights W 5 W
Turn the pin connector B a quarter turn and remove it.
Change the bulb.
131
Need help?
Do you have a question about the 206 and is the answer not in the manual?
Questions and answers