Changing A Bulb; Front Lights - PEUGEOT 807 Manual

CHANGING A BULB

Front lights

Note: handle the bulbs with a dry cloth.
1 - Dipped beam headlamps: H7-55 W or xenon bulb.
2 - Main beam headlamps: H7-55 W or xenon bulb.
WARNING: RISK OF ELECTROCUTION
Xenon bulbs must be changed by a
PEUGEOT dealer.
3 - Fog lamps: H1-55 W.
Note: make access on the right-hand side easier by
removing the fuse box cover.
Turn the protective cover corresponding to the
faulty bulb a quarter of a turn and remove it.
Disconnect the connector.
Press the end of the securing clip to free it. Change
the bulb.
When fitting the new bulb, ensure that the direction
notches are positioned correctly and the securing
clip is fixed properly.
Reconnect the connector.
Refit the protective cover, then turn it a quarter of a
turn to the right.
06-10-2003
PRACTICAL INFORMATION
The headlamps are fitted with polycarbonate glass with a
protective coating. Do not clean them with a dry or abra-
sive cloth, nor with a detergent or solvent product. Use
a sponge and soapy water.
4 - Side lights: W 5 W.
Push the light from the inside towards the outside of
the bumper.
Pull the light forwards.
Turn the bulb holder a quarter turn to the left and
remove it.
Turn the bulb a quarter turn to the left, remove it and
change it.
When refitting, engage the light towards the outside
and move it towards the inside of the bumper.
5 - Direction indicators: PY 21 W (amber).
Turn the bulb holder a quarter of a turn to the left
and remove it.
Change the bulb.
Note: In certain climatic conditions (low temperature,
humidity), condensation inside the headlamp glass is
normal; it disappears a few minutes after the lights are
switched on.
147