Optipoint Application Module; Firmware Update; Ldap Configuration - Siemens 2000 Administration Manual

Administration
Step by Step
40

optiPoint application module

Firmware Update

Firmware cannot be updated if a Java MIDlet is
active (for example, a speed dialing list).
Perform the following steps to update the software on
your optiPoint application module:
1. Make sure that an FTP server is available, see
page 89, and that the relevant firmware file is
stored on the server.
2. Start the Web-Based Management Tool, see
page 42.
3. Select "Administration" > [password] > "File Trans-
fer", see page 50.
4. Enter the following parameters:
– FTP server address, see
– FTP account name, see
– FTP username, see
– DSM filename, see
5. Select "DSM Filename" from the "Action on submit"
list, see page 58.
6. Select "Submit".

LDAP Configuration

The following prerequisites must be fulfilled to use the
company telephone directory:
• An LDAP server is available and the server data has
been entered in the Web-Based Management Tool,
see page 47.
• For an example of an LDAP template, see
page 70.
optiPoint application module
page 64
page 64
page 65
page 63