Basic Programming; Set Date And Time; Set Watering Start Times; Set Station Run Times - Rain Bird ESP-TM2 User Manual

Basic Programming

1 Set Date and Time

Turn the dial to DATE/TIME.
l Press b
or to select the setting to change.
l Press b
or to change the setting value.
- +
l Press and hold b
or
To change the time format (12 hour or 24 hour):
l With MINUTES blinking, press b
l Press b
or to select the desired time format,
then press to return to the time setting.

2 Set Watering Start Times

Up to four Start Times are available for each program.
Turn the dial to START TIMES.
l Press Program Select to choose the desired Program (if b
necessary).
l Press b
or to select an available Start Time.
l Press b
or to set the selected Start Time (ensure the
AM/PM setting is correct).
l Press b
to set additional Start Times.

3 Set Station Run Times

Run Times can be set from one minute up to six hours.
Turn the dial to RUN TIMES.
l Press Program Select to choose the desired Program (if b
necessary).
l Press b
or to select a Station.
l Press b
or to set the Run Time for the selected Station.
l Press b
to set additional Station Run Times.
6 ESP-TM2 Controller
to accelerate adjustments.
.

4 Set Watering Days

Custom Days of the Week

Set watering to occur on specific days of the week.
Turn the dial to RUN DAYS.
l Press Program Select to choose the desired Program (if b
necessary).
l Press b
or to set the selected (blinking) day as either
ON or OFF, and to automatically move to the next day.
l You can press b
or
the previous or next day.
d b
CAUTION: If Sunday is selected,
activate Cyclic Watering (see the Advanced Programming
section). If this is not desired, press the
return to watering by Custom Days.
at any time to move the cursor to
will enter and
button to