Sanyo SCP-7200 Operating Manual page 38

5.Select On or Off and press Menu/OK.
To Place Roaming Calls With Call Guard On:
1. From the Standby mode, dial 1 + area code + the seven-digit number. (You can also
initiate a call from the Internal Phone Book, Call History or Messaging.)
2. Press TALK or SPEAKER or press Menu/OK, highlight Call or Call:Speaker and
press Menu/OK).
3. Press 1 to proceed while the pop-up message is displayed.
or
Press any key to erase the pop-up message, then press Menu/OK, highlight Roam
Call or Roam:Speaker and press Menu/OK.
To Answer Incoming Roaming Calls With Call Guard On:
1. Press TALK or SPEAKER.
2. Press 1 to proceed while the pop-up message is displayed.
OR
3. Press Menu/OK, highlight Answer or Answer:Speaker and press Menu/OK.
Remember if the Call Guard feature is set to On, you need to take extra steps to make
and receive roaming calls even if you have selected the Analog setting.
37