Dialing And Saving Phone Numbers With Pauses; Four-Digit Dialing; Dialing From The Internal Phone Book - Sanyo SCP-7200 Operating Manual

Dialing and Saving Phone Numbers With Pauses

You can dial or save phone numbers with pauses for use with automated systems, such
as voicemail or credit card billing numbers. If you select a hard pause, the next set of
numbers are sent when you press TALK or SPEAKER. If you select a 2-second pause,
your phone automatically sends the next set of after two seconds.
Note: You can have multiple pauses in a phone number and combine 2-second and hard pauses.
To dial or save a phone number with pauses:
1. Enter the number and press Menu/OK.
2. Highlight either Hard Pause or 2-Second Pause and press Menu/OK.
Hard Pauses are displayed as a "H" and 2-second pauses as a "T".
3. Enter additional numbers.
4. Press Menu/OK, highlight Call or Call:Speaker On to dial the number of Save Phone#
to save the number in your Internal Phone Book and press Menu/OK.
When dialing a number with a hard pause, press Menu/OK and highlight Send Tone
and press Menu/OK to send the next set of numbers.

Four-Digit Dialing

Enter four digits and press Menu/OK to display the 4-Digit Dialing option. If you select
Abbrev. Dial, your phone dials the phone number in your Internal Phone Book that ends
with the four digits you entered. See page 28 for setting this feature.
To use 4-Digit Dialing:
1. Dial the last four digits of an Internal Phone Book entry's phone number.
2. Press Menu/OK to display the menu options.
3. Highlight Abbrev. Dial and press Menu/OK or TALK (or SPEAKER)
Note: 4-Digit Dialing dials the first number in your Internal Phone Book that matches the four digits.

Dialing From the Internal Phone Book

1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight Phone Book and press Menu/OK.
3. Highlight Find Name and press Menu/OK.
l Press right of the Navigation key for shortcut (steps 1 through 3).
4. Use your Navigation key to scroll through the Phone Book list and highlight one of
the appropriate entries and press Menu/OK.
5. Select the box under your desired memory location by scrolling.
6. Press Options (right softkey) for the menu options.
7. Highlight your desired feature and press Menu/OK.
17