Setting Font Size; Changing The Display Color; Setting The Display Screen - Sanyo SCP-7200 Operating Manual

Setting Font Size

There are four font size settings for the message notification and browser. To change the
font size, follow these steps:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight Settings, and press Menu/OK.
3. Highlight Display, and press Menu/OK.
4. Highlight Font Size, and press Menu/OK.
5. Highlight Notifications or Browser, and press Menu/OK.
6. Select your desired font size.
l Press Preview (right softkey) to display a font size example.
7. Press Menu/OK to set the selected font.
Tip: From the font example display, you can see the larger/smaller font displays by
pressing left/right of the Navigation key.

Changing the Display Color

To change the display color setting:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight Settings, and press Menu/OK.
3. Highlight Display, and press Menu/OK.
4. Highlight Color, and press Menu/OK.
5. Select your desired color, and press Menu/OK.

Setting the Display Screen

This feature lets you display the animation as a display for Standby, Outgoing Calls or
Service Search.
To assign the Animation:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight Settings, and press Menu/OK.
3. Highlight Display, and press Menu/OK.
4. Highlight Animation, and press Menu/OK.
5.Highlight Standby, Outgoing Calls or Service Search and press Menu/OK.
l Press Preview (right softkey) to see an example display.
6. Select the menu under the item and press Menu/OK.
For Standby, also set animation starting time. Select the option under after and press
Menu/OK then, and highlight your desired setting time, and press Menu/OK.
Preset : the pre-programmed data.
l
Get New: start up a Browser and you can select an item to download.
l
To deactivate this feature, select Off at the step 7 above.
24