Using Voice Prompt; Alert Notification - Sanyo SCP-7200 Operating Manual

Using Voice Prompt

This feature allows you to hear voice prompts at Voice Memo, Screen Call setting or
Voice Dial etc. (Default Setting is On).
To deactivate this feature:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight Settings and press Menu/OK.
3. Highlight Sounds and press Menu/OK.
4. Highlight Others and press Menu/OK.
5. Select the menu under Voice Prompt and press Menu/OK.
6. Highlight Off and press Menu/OK.
Tip: When ringer volume is set to "Silence All", voice prompts cannot be heard.

Alert Notification

Your phone comes with several different options to keep you aware of what's going on by
sounding the alert or ringer.
Service sets alert On or Off for network services parameter changes.
l
Voicemail sets alert to notify you of caller's message(s).
l
Messaging sets alert to notify you of text message(s).
l
Minute Beep sets a minute reminder that beeps ten seconds before the end of each
l
minute during a call.
l Signal Fade sets alert to notify you when your phone loses a signal during a call
To set the alerts:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight Settings, and press Menu/OK.
3. Highlight Sounds, and press Menu/OK.
4. Highlight Alerts, and press Menu/OK.
5. Highlight your desired option, and press Menu/OK.
6. If you selected Service, Minute Beep or Signal Fade, select On or Off.
If you selected Voicemail or Messaging, select Once, Repeat Alert or Off.
Tip: Repeat Alert sounds every two minutes for twenty minutes and the ringer sounds
for ten seconds.
22