Changing Your Phone's Setting; Adjusting The Phone's Volume Settings - Sanyo SCP-7200 Operating Manual

Changing your Phone's Setting

Adjusting the Phone's Volume Settings

To change the ringer/key volume:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight Settings, and press Menu/OK.
3. Highlight Sounds, and press Menu/OK.
4. Highlight Ringer/Key Vol., and press Menu/OK.
5. Select the menu under each item.
Ringer Volume for adjusting Ringer tone volume.
l
Start-up/Pw-off for adjusting Start-up/Power-Off tone volume.
●
Key Beep for adjusting Key Beep tone volume.
l
6. Highlight your desired volume level, and press Menu/OK.
Ringer Off to set the Voice Call ringer volume to off.(Only appears in Ringer Volume
●
Setting).
Silence All to set all the ringer volume to off. (Only appears in Ringer Volume
●
Setting).
To adjust Earpiece volume:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight Settings, and press Menu/OK.
3. Highlight Sounds, and press Menu/OK.
4. Highlight Receiver Volume, and press Menu/OK.
5. Select Earpiece or Speaker, and press Menu/OK.
6. Highlight your desired volume level.
Tip: You can adjust the receiver volume in Standby mode or the earpiece volume during
a call by using the Navigation keys or volume keys on the side of your phone.
19