Changing The Ied Functionality; Defining The Setting Group; Activating A Setting Group - ABB Relion 670 series Operation Manual

1MRK 500 127-UEN D
GUID-0CFAED62-312B-449F-BB58-D49496EA1CC8 V2 EN-US
Figure 52: Clear view
The content of the Clear menu depends on the configuration configured with PCM600.
2.
Select the item to be cleared with
3.
Press
4. To clear other items, repeat the steps.
7.4

Changing the IED functionality

7.4.1

Defining the setting group

7.4.1.1

Activating a setting group

IED settings are planned in advance for different operation conditions by calculating setting
values to different setting groups. The active setting group can be changed manually from the
menu or by the PCM600 tool.
1.
Select Main menu/Settings/Active setting group/SETGRPS:1 and press
670 series
Operation manual
, select OK to confirm the selection or Cancel to cancel the selection.
Do not switch off the auxiliary power supply to the IED before changes, for
example, setting parameter or local/remote control state changes are saved.
Do not switch off the auxiliary power supply to the IED before changes. For
example, when setting parameter changes are saved.
IEC13000236-1-en.vsd
or .
Section 7
Operating procedures
GUID-A9853F1B-78ED-4AEF-AAE2-C27FF3DAE408 v3
AMU0600439 v8
.
65