Through Fault Monitoring Report; Through Fault Monitoring Tool - ABB Relion 670 series Operation Manual

1MRK 500 127-UEN D
7.1.5

Through fault monitoring report

Through fault reports can be viewed via the user interface using either the PCM tool or the
local HMI. Additionally, the IED generates through fault reports those can be exported using
multiple ways.
7.1.5.1

Through fault monitoring tool

The through fault monitoring report can be viewed using a specific tool known as through
fault monitoring using PCM600 tool. This tool can store last 100 through faults and each
through fault details can be viewed using this tool. The collected data can either be retrieved
as a direct file transfer from the IED or be exported using PCM600 tool.
Starting the through fault monitoring tool
Proceed as follows to start the through fault monitoring tool from the IED level:
1. Right click on the Plant Structure of an IED.
2. Select the Through Fault Monitoring from the context menu as shown in
IEC18000083 V1 EN-US
Figure 39: Starting the through fault monitoring tool
The through fault reports are read from the IED and the tool gets started. By default,
Fault reports related to the latest function instances are displayed.
User interface
The through fault monitoring tool consists of Through Fault Monitoring tab. The tab contains
two sets of table; an overview of all individual through fault events and detailed report of a
selected through fault event, as shown in
670 series
Operation manual
IEC18000083-1-en.vsdx
Figure 40.
Section 7
Operating procedures
GUID-7B1BBAA3-7E5C-4F4E-BD90-B5D8A47036CE v1
GUID-5BB942EF-AEF3-4880-8ECC-9CA9A569471A v1
GUID-7BB279C0-D436-417D-ACBE-C0CBA55C0DD6 v1
Figure 39.
GUID-1369931E-6AC4-4523-9C10-EA3EFDD3B57E v1
57